Envíos
Gratis

En pedidos > A 199€

Bienvenido a Rage Audio!

94 473 3196

Navegación de la categoría

Resultados de la búsqueda para 'Doepfer'

Artículos 1 a 30 de 194 totales

por página
Página:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Cuadricula  Lista 

Configurar sentido ascendente
  1. Doepfer A-111-4 Quad Precision VCO

    Doepfer A-111-4 Quad Precision VCO

    Entrega en 5-7 días

    380 € 21% IVA inc

    Módulo oscilador 

    A-111-4 contiene cuatro VCO de precisión y tiene controles individuales, entradas y salidas para cada VCO disponible, así como una unidad de control y salida común. Después de todo, el A-111-4 es muy similar a cuatro A-111-3 sin modo LFO, pero tiene mezcladores de salida incorporados para las tres formas de onda y un control master para los cuatro VCO.

    Saber más
  2. Softube Doepfer A-101-2 Vactrol LPG

    Softube Doepfer A-101-2 Vactrol LPG

    35 € 21% IVA inc

    Plugin de módulo de filtro Low Pass  - Licencia

    Desde que el filtro pasa bajos bajo fuera inventado por Don Buchla, lis filtros de pasa bajo han sido reconocidos por su capacidad de añadir una respuesta realista y orgánica y texturas a parches de sintetizadores modulares. Doepfer A-101-2 Vactrol LPG añade esto y más a sus patches de Modular.

    Orgánico, cremoso, cálido, leñoso, elástico, musical, natural, acústico-estas son palabras que comúnmente describen el carácter de un módulo de filtro de pasa bajo puede añadir a patches de sintetizador.

    Un concepto clásico ampliado
    Originalmente, el filtro de pasa bajo es una invención del legendario pionero de sintetizadores Don Buchla. Doepfer  ha expandido en el concepto agregando características inteligentes, no solo el control de la resonancia que puede agregar a cualquier cosa unos matices sutiles a la chispeante resonancia, y llevarla más lejos a la auto-oscilación.

    Control de Vactrol 
    Los módulos Doepfer LPG de hardware se basan en vactrols, al igual como los compresores opto. El tiempo de respuesta de estos puede variar enormemente, que es parte del encanto del LPG. La versión plug-in de Doppfer LPG de Softube agrega el conmutador Vact que no forma parte del hardware original. Esto permite al usuario seleccionar entre un tiempo de respuesta rápido, medio o lento, para cubrir la variación entre unidades analógicas individuales.

    Presets preparados por expertos
    El plugin incluye más de treinta presets nuevos e inspiradores que ponen el Doepfer LPG a una excelente disposición en su rack Modular.

    Saber más
  3. Doepfer A-100 Mini System LC6

    Doepfer A-100 Mini System LC6

    Consultar plazo de entrega

    1.249 € 21% IVA inc

    The A-100 Mini System is an useful minimal configuration of the A-100 system. It contains 10 modules including a MIDI interface and is housed in a 6U Wooden Cabinet. 

    These modules are included in the Mini System:

    2x Standard VCO A-110
    1x Ring Modulator A-114
    1x Noise/Random A-118
    1x VCF A-120 (24dB low pass)
    1 x logarithmic VCA A-131
    1 x logarithmic Mixer A-138b
    1 x ADSR A-140
    1 x LFO A-145
    1 x MIDI-to-CV/Gate/Sync Interface A-190-4
    1x A-100 LC6 Case
    15 patch cables (mixed)

    Saber más
  4. Doepfer CABLE ADAPTADOR JACK 1/4"/ Mini Jack 3.5 mm 1,5m

    Doepfer CABLE ADAPTADOR JACK 1/4"/ Mini Jack 3.5 mm 1,5m

    Envío inmediato

    8 € 21% IVA inc

    Cable de 1,5m de Jack Macho mono a Mini Jack 3,5mm 

    Saber más
  5. Doepfer A-138p Vintage

    Doepfer A-138p Vintage

    Entrega en 5-7 días

    139 € 21% IVA inc

    Modulo mixer de 4 canales versión Vintage

    The A-138p input module of the Performance Mixer system has four channels featuring controls for gain, aux send, panorama and output level as well as a mute switch and a peak-LED for the input signal. 

    A number of input modules can be cascaded to form a mixer with more inputs, growing with your needs. 

    Modules A-138p and A-138o are used to built a simple performance mixer (instead of an external stand-alone mixer). The module A-138p is the 4-fold input module while A-138o is the output module that can be combined with one or more A-138p's, resulting in a mixer with four, eight, twelve or even more inputs. 

    The A-138p Performance Mixer Input features four identical input channels. On top is the input socket with a peak LED, the input gain control for adapting to different signal levels is located at the bottom for practical reasons, just besides the mute switch. 
    Beneath the input there's a potentiometer setting the aux send level. Per channel you can determine whether the aux control is pre or post. 
    The next potentiometer sets the panorama position for the according channel and below we can find a bigger potentiometer responsible for the channel's output level which is then sent to the output module. 

    Saber más
  6. Doepfer A-138o Vintage

    Doepfer A-138o Vintage

    Entrega en 5-7 días

    69 € 21% IVA inc

    Modulo Auxiliar  de 4 canales versión Vintage

    The output module of the Performance Mixer system sums all conencted input modules and their channels, controls the final volume as well as separately the aux send and aux return levels . 

    No matter how many A-138p Input modules are connected, the A-138o Performance Mixer Output adds all of them to one stereo sum which is emitted at separate sockets for left and right. 

    Besides this all signals from the channel auxiliaries are summed, available at the Aux Send socket. The Aux Send level can be adjusted. 
    the effect signal has to return into the mixer somewhere of course, which is handled via the Aux Return mono socket. The Aux Return level is adjustable with a potentiometer

    Saber más
  7. Doepfer A-111-2 High End VCO II Vintage

    Doepfer A-111-2 High End VCO II Vintage

    Entrega en 5-7 días

    265 € 21% IVA inc

    Módulo oscilador High-End Vintage

    The successor of the A-111 High End oscillator is an utterly precise analog VCO/LFO with a extremely big frequency range, immaculate tracking over at least ten octaves and nearly perfect waveforms. 
    With linear and exponential FM, pulse width modulation, two simultaneous types of sync and attenuators on all CV inputs the module is really well-appointed. 

    Not less than four frequency controls make tuning an ease: 

    - switch for LFO or VCO range 
    - octave rotary switch with six positions 
    - fine tuning control (approximately one octave range) 
    - coarse tune control (approximately one semitone range) 

    The oscillator has a frequency range of at least fifteen octaves (0.0001 - 40Hz in LFO mode, 0.5Hz - 20kHz in VCO mode) and has perfect Volt per octave tracking over at least ten osctaves, typically in the range of 20Hz to 20kHz. Frequencies below 25Hz are visualized with a two-color LED. 
    An 1V/octave input without attenuator is expanded by two scaleable FM inputs, one for linear and one for exponential frequency modulation. Using a jumper you can decide whether the module obtains pitch CV via the internal bus. 

    The VCO has a triangle core from which sawtooth, pulse and sine are derived. The wave forms are almost perfect and sans glitches. 
    The pulse width can be set with a control from 0 to 100% and of couse it can be modulated. 
    The A-111-2 features not only one but two inputs for oscillator synchronisation - one for hard and one for soft sync, which both differ in sound with the hard sync being more aggressive and richer in harmonics.

    Saber más
  8. Doepfer  A-101-2 Vintage

    Doepfer A-101-2 Vintage

    Entrega en 5-7 días

    98 € 21% IVA inc

    A-101-2 is a vactrol based combination of Low Pass filter (LP) and VCA and was inspired by the Buchla module 292. 

    The term "Low Pass Gate" was created by Don Buchla and stands for a module that can be switched between low pass and VCA. The control (manually and via external CV) is responsible for frequency in the low pass mode and for loudness in the VCA mode. 

    Additionally a combined mode LP+VCA is available. In this mode the sound becomes more dull as the loudness decreases. 

    A-101-2 Vactrol Low Pass Gate Vintage

    In contrast to the Buchla design the A-101-2 offers attenuators for both CV and audio input, a manual resonance control and two gate inputs to control the function of the module in addition to the manual toggle switch.


    In principle the A-101-2 is a 12 dB low pass filter that can be switched to VCA or a combination of Low Pass and VCA. 
    The controlling elements for frequency (LP mode) resp. amplitude (VCA mode) are so-called vactrols. 
    Vactrols are known for their smooth sound behaviour. 

    Because of the vactrol circuit the audio signal is not fully attenuated in the VCA mode at the minimum setting of the F/A control. 

    The Frequency (in the LP mode) resp. the Amplitude (in the VCA mode) is controlled manually (F/A) and by the 2 control inputs CV1 (without attenuator) and CV2 (with attenuator). 

    The audio input is equipped with an attenuator to enable distortion too (above ~ position 5 distortion is obtained with standard A-100 audio levels, e.g. VCO). 

    The resonance function "colors" to the sound and is adjustable all the way up to self-oscillation. Resonance and consequently self-oscillation may vary with the filter frequency because of vactrol tolerances. Due to the circuit the resonance has a little bit an influence on the audio level (increasing resonance = increasing audio level). To obtain the original Buchla sound the resonance control simply has to be set fully counterclockwise. 

    The function of the module is controlled by a manual switch. The left and right positions of the switch correspond to LP resp. VCA mode. In the middle position one obtains the combination of Low Pass and VCA. In this position it is also possible to control the function of the module by the two Gate inputs G1 and G2. The table printed at the front panel shows the connection between the gate levels (L = low, H = high) and the module function.

    Saber más
  9. Doepfer MKE Universal Midi Keyboard Electronics 4/5 Oktaven

    Doepfer MKE Universal Midi Keyboard Electronics 4/5 Oktaven

    Entrega en 5-7 días

    85 € 21% IVA inc

    Doepfer MKE is an Universal Midi Keyboard Electronics to built custom-made Midi controllers that include a keyboard.

    Doepfer MKE is an Universal Midi Keyboard Electronics to built custom-made Midi controllers that include a keyboard. Combining the MKE with our controller electronics Pocket Electronic, Dial Electronic, CTM64 or MTC64 allows the construction of an unique Midi controller that exactly meets the requirements of the user. 

    Saber más
  10. Doepfer VINTAGE ROTARY KNOB

    Doepfer VINTAGE ROTARY KNOB

    Envío inmediato

    Precio regular: 4 €

    Precio especial: 3,49 €

    21% IVA inc

    Perilla estilo Vintage 

    Perilla en color negro brillante recubierta de placa de plata metálica  y dos puntos blancos, diámetro de fondo 15mm, superior 12mm, altura 16 mm, para eje de 6mm con 18 dientes

    Saber más
  11. Doepfer A-100LC9 Vintage Low Cost Frame

    Doepfer A-100LC9 Vintage Low Cost Frame

    Entrega en 5-7 días

    425 € 21% IVA inc

    Chasis Eurorack de 3 pisos versión Vintage con fuente de alimentación

    Saber más
  12. Doepfer A-100LC6 Vintage Low Cost Frame

    Doepfer A-100LC6 Vintage Low Cost Frame

    Entrega en 5-7 días

    369 € 21% IVA inc

    Chasis Eurorack de 2 pisos versión Vintage  con fuente de alimentación

    Saber más
  13. Doepfer A-111-2 High End VCO II

    Doepfer A-111-2 High End VCO II

    Entrega en 5-7 días

    239 € 21% IVA inc

    Módulo oscilador High-End

    Module A-120 is a voltage controlled low-pass filter, which filters out the higher parts of the sound spectrum, and lets lower frequencies pass through. 
    The Cut-Off Frequency determines the point at which filtering takes effect. 

    You can control this manually, or by voltage control (filter modulation, for instance by an LFO). Three CV inputs are available, and the sum of the voltages from these affects the filter cut-off. 

    VCF1 is a co-called "transistor ladder" design, with a cut-off slope of -24 dB/octave, as in various Moog synthesizers. 
    That's what gives it its classic, legendary Moog sound. 
    Resonance (or Emphasis) is adjustable all the way up to self-oscillation - in which case the filter behaves like a sine wave oscillator.

    Saber más
  14. Doepfer A-138o

    Doepfer A-138o

    Entrega en 5-7 días

    57 € 21% IVA inc

    Modulo Auxiliar  de 4 canales

    The output module of the Performance Mixer system sums all conencted input modules and their channels, controls the final volume as well as separately the aux send and aux return levels . 

    No matter how many A-138p Input modules are connected, the A-138o Performance Mixer Output adds all of them to one stereo sum which is emitted at separate sockets for left and right. 

    Besides this all signals from the channel auxiliaries are summed, available at the Aux Send socket. The Aux Send level can be adjusted. 
    the effect signal has to return into the mixer somewhere of course, which is handled via the Aux Return mono socket. The Aux Return level is adjustable with a potentiometer

    Saber más
  15. Doepfer A-138p

    Doepfer A-138p

    Entrega en 5-7 días

    108 € 21% IVA inc

    Modulo mixer de 4 canales

    The A-138p input module of the Performance Mixer system has four channels featuring controls for gain, aux send, panorama and output level as well as a mute switch and a peak-LED for the input signal. 

    A number of input modules can be cascaded to form a mixer with more inputs, growing with your needs. 

    Modules A-138p and A-138o are used to built a simple performance mixer (instead of an external stand-alone mixer). The module A-138p is the 4-fold input module while A-138o is the output module that can be combined with one or more A-138p's, resulting in a mixer with four, eight, twelve or even more inputs. 

    The A-138p Performance Mixer Input features four identical input channels. On top is the input socket with a peak LED, the input gain control for adapting to different signal levels is located at the bottom for practical reasons, just besides the mute switch. 
    Beneath the input there's a potentiometer setting the aux send level. Per channel you can determine whether the aux control is pre or post. 
    The next potentiometer sets the panorama position for the according channel and below we can find a bigger potentiometer responsible for the channel's output level which is then sent to the output module. 

    Saber más
  16. Doepfer USB64

    Doepfer USB64

    Envío inmediato

    135 € 21% IVA inc

    Midi and USB interface - Universal MIDI Control Electronics with 64 inputs

    Saber más
  17. Doepfer A-157 Trigger Sequencer

    Doepfer A-157 Trigger Sequencer

    Entrega en 5-7 días

    485 € 21% IVA inc

    Secuenciador y Trigger analógico de dos filas de 8 pasos y dos filas de potenciometros de control y dos filas de conmutadores

    Analog and Trigger Sequencer, 2 rows of 8 steps with knobs and 2 rows of 8 steps switches 

    Features of the analog rows (knobs): 
    - 8 potentiometers (knobs) 
    - lower row: Scale (knob), upper row: 1V/2V/4V 
    (octave range switch for exact VCO control) 
    - Glide time (knob), same as portamento or slew limiter 
    - Glide Control (control input for switching glide on/off) 
    - S/H Control (control input for internal S and H, works like A-148) 
    - Pre Glide/S and H-Out (analog output before S/H and glide unit, especially required when external audio signals are used as inputs of the lower row) 
    - Post Glide/S and H-Out (analog output after S/H and glide unit) 
    - lower row: external inputs for the 8 steps (switched jack sockets), control signals or audio signals may be used as inputs (allowed voltage range -5V...+12V), the knobs of the lower row are working in this case as attenuators 

    Features of the trigger rows (switches): 
    - 4 Trigger/Gate tracks with 2 rows of switches 
    - toggle switches of 1-0-1 type (with middle position), which can be used to send a trigger/gate to the track above or below or to send no trigger/gate (middle position) 
    - 3 trigger rows (i.e. short pulse for each step set, pulse width corresponds to the pulse width of the clock/step input signal) 
    - 1 gate row (i.e. a high signal is applied during the length of the step set)

    Control inputs and buttons: 
    - Step (defines the tempo of the sequence, same as clock or trigger input)
    - Reset (resets all rows to step 1) 
    - Start (starts the sequence at the momentary position) 
    - Stop (stops the sequence at the momentary position) 

    Step and Reset are compatible to the MIDI interface A-190, i.e. in combination with the A-190 the A-155 may be synchronized via MIDI. 
    The quantizing module A-156 can be used to quantize the infinite analog voltages coming from A-155 into discrete semitone steps (multiples of 1/12V). 
    Without MIDI interface e.g. a LFO rectangle output can be used to define the tempo of the sequence. 
    The sequencer controller A-154 adds a lot of new functions to the A-155 (e.g. voltage controlled addressing, forward/backward/pendulum/random mode, voltage control of first and last step, voltage controlled clock and gate length, step skipping, combination of several A-155 in parallel/serial mode and many more).

    Saber más
  18. Doepfer A-155 Analog/Trigger Sequencer Vintage Edition

    Doepfer A-155 Analog/Trigger Sequencer Vintage Edition

    Entrega en 5-7 días

    329 € 21% IVA inc

    Secuenciador analógico de dos filas de 8 pasos y dos filas de potenciometros de control 

    Features of the analog rows (knobs): 
    - 8 potentiometers (knobs) 
    - lower row: Scale (knob), upper row: 1V/2V/4V 
    (octave range switch for exact VCO control) 
    - Glide time (knob), same as portamento or slew limiter 
    - Glide Control (control input for switching glide on/off) 
    - S/H Control (control input for internal S and H, works like A-148) 
    - Pre Glide/S and H-Out (analog output before S/H and glide unit, especially required when external audio signals are used as inputs of the lower row) 
    - Post Glide/S and H-Out (analog output after S/H and glide unit) 
    - lower row: external inputs for the 8 steps (switched jack sockets), control signals or audio signals may be used as inputs (allowed voltage range -5V...+12V), the knobs of the lower row are working in this case as attenuators 

    Features of the trigger rows (switches): 
    - 4 Trigger/Gate tracks with 2 rows of switches 
    - toggle switches of 1-0-1 type (with middle position), which can be used to send a trigger/gate to the track above or below or to send no trigger/gate (middle position) 
    - 3 trigger rows (i.e. short pulse for each step set, pulse width corresponds to the pulse width of the clock/step input signal) 
    - 1 gate row (i.e. a high signal is applied during the length of the step set)

    Control inputs and buttons: 
    - Step (defines the tempo of the sequence, same as clock or trigger input)
    - Reset (resets all rows to step 1) 
    - Start (starts the sequence at the momentary position) 
    - Stop (stops the sequence at the momentary position) 

    Step and Reset are compatible to the MIDI interface A-190, i.e. in combination with the A-190 the A-155 may be synchronized via MIDI. 
    The quantizing module A-156 can be used to quantize the infinite analog voltages coming from A-155 into discrete semitone steps (multiples of 1/12V). 
    Without MIDI interface e.g. a LFO rectangle output can be used to define the tempo of the sequence. 
    The sequencer controller A-154 adds a lot of new functions to the A-155 (e.g. voltage controlled addressing, forward/backward/pendulum/random mode, voltage control of first and last step, voltage controlled clock and gate length, step skipping, combination of several A-155 in parallel/serial mode and many more).

    Saber más
  19. Doepfer A-100LC3 Vintage Low Cost Frame

    Doepfer A-100LC3 Vintage Low Cost Frame

    Envío inmediato

    229 € 21% IVA inc

    Chasis Eurorack versión Vintage con fuente de alimentación


    Saber más
  20. Doepfer A-199 Vintage Edition Spring Reverb

    Doepfer A-199 Vintage Edition Spring Reverb

    Entrega en 5-7 días

    139 € 21% IVA inc

    Module A-199 Vintage Edition is a spring reverb module. 

    The reverb effect is electronically simulated by means of 3 spiral springs. 

    Spring reverb systems have a very characteristic sound that is based on the (insufficient) mechanical properties of the springs like signal delays, audio resonances, limited frequency range, acoustic feedback behaviour, sensitivity to mechanical shocks and others. 
    The 3-spring system used in the A-199 ensures a "dense" reverb because of the different properties of the three springs. 

    The A-199 implies some special features that are not self-evident for spring reverb units: 
    The reverb signal can be fed back to the input using the Feedback control. Even self-oscillation of the springs similiar to the self-oscillation of filters is available. 
    The feedback loop can lead even via external modules like VCA, VCF, phaser, frequency shifter, vocoder, distortion/waveshaper, ring modulator and others. 

    In this case the reverb output of the A-199 is connected to the input of the external module(s) and the output of the external module(s) is fed back to the Ext.Feedback In socket of the A-199. 

    This socket contains a switch that interrupts the internal feedback loop as soon as a plug is inserted. 
    Another feature is the Emphasis control. This enables the adjustment of the accentuation of middle frequencies (around ~ 2kHz). 

    With the Mix control the relation between original and reverb signal appearing at the mix output is adjusted. Using all these features very extreme and unusual effects can be generated with the A-199. 

    Inputs: Audio In, ext. Feedback In (switched socket) 
    Outputs: Reverb Out (pure reverb signal), Mix Out 
    Controls: Level (input level), Feedback, Emphasis, Mix 

    Saber más
  21. Doepfer A-188-1D Vintage Edition BBD 4096 Stages

    Doepfer A-188-1D Vintage Edition BBD 4096 Stages

    Entrega en 5-7 días

    185 € 21% IVA inc

    Doepfer A-188-1C Vintage Edition BBD 4096 Stages

    Module A-188-1 is a so-called Bucket Brigade Device module. 
    BBDs have been used to delay audio signals before digital delays dethroned the BBD based effect units. 

    But BBDs have some very unique advantages (or disadvantages dependent on the point of view) over the digital counterpart which result from the special properties of the BBDs. 

    BBD circuits can be treated as a chain of Sample and Hold units (S/H) which pass on their voltages to the next S/H in the chain at each clock pulse. 
    In any case the sounds generated by module A-188-1 are very special. 

    Typical applications are: Flanger, Chorus, Analog Delay or Karplus/Strong synthesis. 

    But as the A-188-1 has a lot of very unique features (voltage controlled clock rate / delay time with extreme range, polarity switches for the CV inputs, feedback and BBD out/mix, clock and CV output of the high speed VCO, BBD clock input, feedback insert, feedback up to self-oscillation) a lot of unusual applications can be realized with the module (e.g. delay controlled by ADSR, envelope, random or sequencer with positive or negative effect). 

    The A-188-1 also has no built-in anti-alisaing filter in order not to limit the possibilities of the module. For this the CV out is intended. 
    Delay range for 4096 stage BBD module: ~ 8.19 - 4096 ms

    Saber más
  22. Doepfer A-188-1C Vintage Edition BBD 2048 Stages

    Doepfer A-188-1C Vintage Edition BBD 2048 Stages

    Entrega en 5-7 días

    149 € 21% IVA inc

    Doepfer A-188-1C Vintage Edition BBD 2048 Stages

    Module A-188-1 is a so-called Bucket Brigade Device module. 
    BBDs have been used to delay audio signals before digital delays dethroned the BBD based effect units. 

    But BBDs have some very unique advantages (or disadvantages dependent on the point of view) over the digital counterpart which result from the special properties of the BBDs. 

    BBD circuits can be treated as a chain of Sample and Hold units (S/H) which pass on their voltages to the next S/H in the chain at each clock pulse. 
    In any case the sounds generated by module A-188-1 are very special. 

    Typical applications are: Flanger, Chorus, Analog Delay or Karplus/Strong synthesis. 

    But as the A-188-1 has a lot of very unique features (voltage controlled clock rate / delay time with extreme range, polarity switches for the CV inputs, feedback and BBD out/mix, clock and CV output of the high speed VCO, BBD clock input, feedback insert, feedback up to self-oscillation) a lot of unusual applications can be realized with the module (e.g. delay controlled by ADSR, envelope, random or sequencer with positive or negative effect). 

    The A-188-1 also has no built-in anti-alisaing filter in order not to limit the possibilities of the module. For this the CV out is intended. 
    Delay range for 2048 stage BBD module: ~ 4.10 - 2048 ms

    Saber más
  23. Doepfer A-188-1B Vintage Edition BBD 1024 Stages

    Doepfer A-188-1B Vintage Edition BBD 1024 Stages

    Entrega en 5-7 días

    149 € 21% IVA inc

    Doepfer A-188-1B Vintage Edition BBD 1024 Stages

    Module A-188-1 is a so-called Bucket Brigade Device module. 
    BBDs have been used to delay audio signals before digital delays dethroned the BBD based effect units. 

    But BBDs have some very unique advantages (or disadvantages dependent on the point of view) over the digital counterpart which result from the special properties of the BBDs. 

    BBD circuits can be treated as a chain of Sample and Hold units (S/H) which pass on their voltages to the next S/H in the chain at each clock pulse. 
    In any case the sounds generated by module A-188-1 are very special. 

    Typical applications are: Flanger, Chorus, Analog Delay or Karplus/Strong synthesis. 

    But as the A-188-1 has a lot of very unique features (voltage controlled clock rate / delay time with extreme range, polarity switches for the CV inputs, feedback and BBD out/mix, clock and CV output of the high speed VCO, BBD clock input, feedback insert, feedback up to self-oscillation) a lot of unusual applications can be realized with the module (e.g. delay controlled by ADSR, envelope, random or sequencer with positive or negative effect). 

    The A-188-1 also has no built-in anti-alisaing filter in order not to limit the possibilities of the module. For this the CV out is intended. 
    Delay range for 1024 stage BBD module: ~ 2.05 - 1024 ms

    Saber más
  24. Doepfer A-188-1A Vintage Edition BBD 512 Stages

    Doepfer A-188-1A Vintage Edition BBD 512 Stages

    Entrega en 5-7 días

    153 € 21% IVA inc

    Doepfer A-188-1A Vintage Edition BBD 512 Stages

    Module A-188-1 is a so-called Bucket Brigade Device module. 
    BBDs have been used to delay audio signals before digital delays dethroned the BBD based effect units. 

    But BBDs have some very unique advantages (or disadvantages dependent on the point of view) over the digital counterpart which result from the special properties of the BBDs. 

    BBD circuits can be treated as a chain of Sample and Hold units (S/H) which pass on their voltages to the next S/H in the chain at each clock pulse. 
    In any case the sounds generated by module A-188-1 are very special. 

    Typical applications are: Flanger, Chorus, Analog Delay or Karplus/Strong synthesis. 

    But as the A-188-1 has a lot of very unique features (voltage controlled clock rate / delay time with extreme range, polarity switches for the CV inputs, feedback and BBD out/mix, clock and CV output of the high speed VCO, BBD clock input, feedback insert, feedback up to self-oscillation) a lot of unusual applications can be realized with the module (e.g. delay controlled by ADSR, envelope, random or sequencer with positive or negative effect). 

    The A-188-1 also has no built-in anti-alisaing filter in order not to limit the possibilities of the module. For this the CV out is intended. 
    Delay range for 512 stage BBD module: ~ 1.02 - 512 ms

    Saber más
  25. Doepfer A-180-2 Multiples Vintage Edition

    Doepfer A-180-2 Multiples Vintage Edition

    Entrega en 5-7 días

    38 € 21% IVA inc

    Doepfer A-180-2 Multiples 1

    Module A-180-2 is a simple multi-connector. It has eight inter-connected sockets, so that you can patch more inputs or outputs into any module. 

    The sockets are split into two groups of four. If an 8-fold multiple is required a bridge has to be soldered at the pc board. 
    Even though the A-180-1 is a very "primitive" low-level module it is required very often. Within a big A-100 system sufficient multiples should be planned

    Saber más
  26. Doepfer A-170 Dual Slew Limiter Vintage Edition

    Doepfer A-170 Dual Slew Limiter Vintage Edition

    Entrega en 5-7 días

    76 € 21% IVA inc

    Doepfer A-170 Dual Slew Limiter Vintage Edition

    Module A-170 contains two separate slew limiters, also known as portamento controllers or integrators. The first SL has just one joint control, which sets both rise and fall times (c. 0 ...10 sec). 

    The second SL has separate controls for rise and fall times, and can therefore be used as a simple AR envelope generator. 
    Over and above this, you can set the overall range for these parameters, with a three-position switch, as on the full ADSRs. 

    Both slew limiters have two LEDs each, to show the state of the rising and falling voltages.

    Saber más
  27. Doepfer A-154 Sequencer Controller Vintage Edition

    Doepfer A-154 Sequencer Controller Vintage Edition

    Entrega en 5-7 días

    193 € 21% IVA inc

    Doepfer A-154 Sequencer Controller Vintage Edition

    Module A-154 is a supplement to the A-155 Analog/Trigger Sequencer module. It offers a lot of new features that are not available in the basic control unit of the A-155.

    The A-154 is used to replace the control unit of one or two A-155, i.e. the section marked "Control" with Start / Stop / Step / Reset buttons and inputs in the upper left corner of the A-155 front panel. If the A-154 is used to control the A-155 the control section of the A-155 is put out of action. 

    These are the features of the A-154: 

    - Several running modes: 
    forward, backward, pendulum, random, CV controlled step adressing. All modes are available as loop or one-shot. 

    - LED display of the 5 different current modes and one LED for loop/one-shot display 

    - Manual and voltage controlled selection (with attenuator) of the running mode. If no external control voltage is applied one of the 10 modes (5 modes x 2 loop/one-shot) is simply selected with a rotary knob. The CV input with attenuator is used to modulate the running mode with an external control voltage (digital high/low CV to switch between two modes or continuous analog CV to sweep through different modes). With the combination of manual control and CV with attenuator it is possible e.g. to use only two neighbouring modes (e.g. forward/backward) or sweep through all possible running modes 

    - Manual and voltage controlled selection (with attenuator) of first and last step of the sequence. The range is step 1...8 in 8 step mode resp. 1...16 in 16 step mode 

    - If the running mode "CV Controlled Step Address" is selected the First Step section is used to determine the active sequencer step. Consequently manual and voltage controlled selection (with attenuator) of the active step is possible: the active step can be set by hand with the first step manual control and then modulated by an external control voltage (e.g. LFO, Random, S/H, Theremin, Light CV source, Joy Stick) at the first step CV input (with attenuator). 

    - An internal voltage controlled clock generator with manual and CV control (with attenuator) is available. The output of the clock generator is displayed with a LED and is used as sequencer clock provided that no external clock signal is connected to the Clock In socket (normalled socket). If the CV input of the Clock section is connected to one of the analog outputs of the sequencer the time for each step can be set separately. Even jumps (or skipping) will be possible as a very short clock pulse will be generated if the control voltage exceeds a certain value. For example the gate row of the A-155 can be used to obtain skipping of steps: the gate output simply has to be conneted to the CV input of the A-154 clock generator. If the corresponding switch of the A-155 is set correspondingly in the gate row the step will be skipped. 

    - Manual and voltage controlled (with attenuator) pulse width (PW) of the clock signal. This features can be used to obtain a different gate length for each step: e.g. one of the CV outputs of the A-155 can be used to control the PW. With a PW control voltage coming from a LFO/random/S and H the gate length will change automatically. CV coming from Theremin A-178, ribbon controller A-198, light controlled CV A-179, joy stick A-174 are other ways to control the gate length. 

    - 8/16 step mode: 
    A toggle switch is used to select 8 or 16 steps. The "16 step" mode requires two A-155 and a voltage controlled switch A-150. The A-150 is controlled by the "A3" output of the A-154. This output remains "low" as long as the active step is in the range 1...8 and turns to "high" in the range 9...16. The A-150 is used to switch between the CV/trigger/gates outputs of the first A-155 (step 1...8) or second A-155 (step 9...16). 

    - If two A-155 are used they can work in parallel (8 steps) or serial (16 steps). The 8/16 steps switch determines if the 8 step mode (one A-155 or two A-155 in parallel) or the 16 step mode (two A-155 serial) is chosen. 

    Both modes work with CV controlled step addressing too. In 8 step mode only the steps 1...8 are addressed, in 16 step mode the steps 1...16. For serial operation an additional VC switch (A-150) is required - as mentioned above. 

    - The functions of the Start/Stop/Step/Reset buttons and inputs are the same as for the "old" control unit of the A-155: 

    - A high level at the Start input or operating the Start button starts the sequence from the momentarily addressed step. Not working in "CV controlled step address" mode. 
    - A high level at the Stop input or operating the Stop button stops the sequence (the last active step remains addressed). Not working in "CV controlled step address" mode. 
    - A high level at the Reset input or operating the Reset button resets the sequence to step 1. The sequence remains at step 1 as long as the Reset input level is high (function is activated by high level, not by low/high transition). Not working in "CV controlled step address" mode. 
    - A positive transition (low -> high) at the Step input or operating the Step button causes an advance to the next step. The step input is connected to the clock output of the internal clock generator provided that no plug is inserted to the step input socket. Not working in "CV controlled step address" mode. 
    - Manual and voltage controlled selection between "old" A-155 control or A-154 control of the A-155 connected to A-154 (A-154 master on/off function

    Saber más
  28. Doepfer A-148 Dual Sample and Hold Vintage Edition

    Doepfer A-148 Dual Sample and Hold Vintage Edition

    Entrega en 5-7 días

    70 € 21% IVA inc

    Doepfer A-148 Dual Sample and Hold / Track and Hold Vintage Edition

    Module A-148 (Dual S/H) has two identical sample and hold modules, designed to produce 'staircase' voltages. The signal present at the sample input is sampled at a rate set by the signal at the trigger input, and held at that voltage at the S/H output. 

    The exact shape of the staircase depends on the sort of waveform at the sample input: NOISE or RANDOM signals produce random patterns; an LFO produces rising or falling staircase patterns. Two LEDs for each S/H indicate the voltage (positive or negative) of the sampled signal. 

    For each sub-module the operation mode S/H (sample and hold) or T/H (track and hold) can be selected by a jumper. 
    In T/H mode the output signal follows the input signal while the trigger input is "high". 

    As soon as the trigger input turns to "low" the last voltage is stored. The factory setting is S/H for the upper device and T/H for the lower device.

    Saber más
  29. Doepfer  A-147-2 LFO Vintage Edition

    Doepfer A-147-2 LFO Vintage Edition

    Entrega en 5-7 días

    134 € 21% IVA inc

    Doepfer  A-147-2 VC-LFO Vintage Edition

    Module A-147-2 is the successor of the VCLFO A-147 but offers much more features than the predecessor. The module is made of these sub-units:

    VCLFO: voltage controlled low frequency oscillator
    VCA: voltage controlled amplifier, switchable to voltage controlled polarizer
    VC delay unit: voltage controlled linear attack envelope (only one parameter: attack) for delayed LFO operation in combination with the VCA (e.g. delayed vibrato/tremolo)

    LFO: The voltage controlled LFO has the waveforms Triangle, Sine, Sawtooth and Rectangle available and features a Reset/Sync input. Triangle/Sine and Rectangle are displayed by means of dual-color LEDs (probably red/green), Sawtooth has a unicolor LED available (probably blue). The output levels are about -4V...+4V for Triangle, Sine and Rectangle. The Sawtooth level is about 0...+8V.

    The CV control can be switched to attenuator or polarizer ("CV Mode" switch). In polarizer mode the CV inputs affects the frequency in the reverse manner when the CV control is left from the center position. In the center position CV has no effect and right from the center the control works like a normal attenuator. The frequency range (without external CV) is from about 0,005 Hz (i.e. about 3 minutes per periode) to 200 Hz. In addition a ultra-low mode can be activated by means of an internal jumper. When the ultra-low jumper is set a fixed voltage is connected to the switching contact of the "LFO CV" socket. In polarizer mode of the CV control that way extremely low frequencies (up to one hour period and more) are possible.

    VCA: This is a linear VCA that can be switched to "normal" VCA (i.e. kind of a voltage controlled attenuator) or voltage controlled polarizer ("VCA Mode" switch). In the "normal" VCA mode amplification +1 is achieved with about +5V control voltage. In polarizer mode the amplification ranges from about -0.5 (i.e. inverted signal with about 50% level) with 0V CV to +0.5 (i.e. non-inverted signal with about 50% level) with +5V CV. With about +2.5V CV the signal is suppressed. Details about the functioning of a voltage controlled polarizer can be found in the description of the module A-133. In this mode the VCA can be treated also a DC coupled ring modulator (similar to A-114).

    The VCA of the A-147-2 has three sockets available: "In" (signal input), "Out" (signal output) and "CV" (control voltage input).
    The Triangle Output of the LFO is normalled to the VCA signal input by means of the switching contact of the "VCA In" socket. If another LFO waveform (or any other signal) should be processed by the VCA the corresponding signal has to be patched to the "VCA In" socket. The VCA can be used also independently from the LFO and the Delay CV. In this case the VCA sockets In, Out and CV have to be patched accordingly. The VCA can be used also as waveshaper for the LFO signals (e.g. by patching VCA In and VCA CV to different LFO signals, if necessary via attenuator A-183-1 or offset generator/attenuator A-183-2).

    Attack/Delay: The third sub-unit of the module is a simple, voltage controlled envelope generator that has only the parameter "Delay" (or Attack) available. This unit generates a linear increasing voltage that starts from 0V after each Delay Reset until it reaches about +5V. Then the voltage remains at +5V until the next Delay Reset occurs. The inclination or gradient is controlled by the manual Delay control and the Delay control voltage ("Delay CV" input). The waveform is linear, the control scale is exponential. The output voltage is displayed by a unicolor LED (probably orange) and available at the "Delay Out" socket.

    The manual Delay control ranges - without external "Delay CV" - from about 5ms (fully CW) up to 2 minutes (fully CCW). By means of an external voltage applied to the "Delay CV" socket this range can be extended. A rising CV shortens the delay time  (behaviour like a VCO) !

    The Delay output voltage ranges from about 0V to +5V. The rising edge of the gate, clock or trigger signal applied to the "Delay Reset" sockets resets the Delay output voltage to 0 V.

    "Delay Out" is normalled to the VCA CV input by means of the switching contact of the "VCA CV" socket and consequently controls the Triangle level provided that no other patch is made. A typical example is the usage of a Gate signal (e.g. from a USB/Midi-to-CV/Gate interface) as Delay Reset. That way a delayed vibrato or tremolo can be realized if the VCA output is patched to the frequency CV input of a VCO (or VCF), or the CV input of a VCA. 

    But the Delay sub-unit can be used also independently from the LFO and VCA, e.g. as a voltage controlled waveshaper or for other applications where a linear increasing signal with voltage controlled steepness is required.

    Saber más
  30. Doepfer A-140 ADSR Vintage Edition

    Doepfer A-140 ADSR Vintage Edition

    Entrega en 5-7 días

    88 € 21% IVA inc

    Doepfer A-140 ADSR Envelope Generator Vintage Edition

    Module A-140 is an envelope generator, and, since it puts out control voltages, counts as one of the modulation devices in a modular system. 
    As soon as the gate input receives sufficient voltage, the ADSR generates a variable voltage, changing in time, called an envelope. 

    This varying voltage is output in normal (positive) and inverted form, and can be used, eg., for voltage controlled modulation of a VCO, VCF, or VCA, or for processing other modules' inputs and outputs. 

    The shape of the envelope is governed by four parameters: Attack, Decay, Sustain and Release. 
    The envelope is started (triggered) by a gate signal either from the INT.GATE voltage on the system bus, or, if a signal is put into it, from the gate input socket. 

    The envelope can also be re-triggered, ie. start from scratch again, each time a trigger signal is sensed at the Retrig. input socket, when the gate is still open. 
    Module A-140 has available a three-position toggle switch to select one of three time ranges. The envelope duration ranges from about 50us (microseconds) up to several minutes. 

    In combination with the Comparator module A-167 a free-running "ADSR-LFO" can be realized.

    Saber más

Artículos 1 a 30 de 194 totales

por página
Página:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Cuadricula  Lista 

Configurar sentido ascendente