Navigation

  • Fave 0

Cwejman CTG-VC Transient Generator

Cwejman CTG-VC Transient Generator

  • Side Cwejman CTG-VC Transient Generator

Fabricante

Cwejman

StockDescatalogado

519 €
O
100% Garantía oficial española del fabricante
Todos nuestro productos tienen garantia oficial en España
Empresa 100% española
Empresa localizada en España con local y tienda física

Comparte este producto



Módulo generador de envolvente Eurorack

CTG-VC, a single complex voltage controlled transient generator 
The envelope generator provide control voltages that can be used for dynamic change of all voltage controlled parameters,...

Más información



Módulo generador de envolvente Eurorack


CTG-VC, a single complex voltage controlled transient generator 
The envelope generator provide control voltages that can be used for dynamic change of all voltage controlled parameters, such as; frequency, amplitude, pulse width, cutoff. 

The most common use is controlling filters cutoff frequency and a voltage controlled amplifiers amplitude in order to achieve dynamic timbre- and level-changes. 
All parameters such as attack time, attack hold time, decay time, sustain level, release time and output level are voltage controlled. 

The CTG-VC is a complex transient generator with a lot of features, such as; two different shapes for the attack, attack hold (A-HOLD) for punchier sound than a standard attack, variable decay slope (D-SLOPE) from natural exponential to heavy logarithmic, attack-decay loop (A-D LOOP) and polarized level for outgoing transient signals which means that both outputs levels are controllable in both directions (positive and negative). 

A-D LOOP switch activates, when ON, a steady state attack/decay generator and the rate is determinated by attack/decay time and attack/decay modes. 

The external signal alone in the A-D RESTART input starts a single A-D transient for every new external signal A-D RESTART period (every shape). The SUSTAIN LEVEL should be in pos. 0. ZERO RESTART resets (when ON) the remaining release voltage for new gate signals so attack starts always from 0. 

ATTACK: Attack time is controlled manually and by an external signal. It has two shapes; logarithmic and exponential, controlled manually by a switch. 
ATTACK HOLD: Attack Hold time is controlled manually and by an external signal. 
DECAY: Decay time time is controlled manually and by an external signal. 
D-SLOPE: Decays shape is controlled manually, from exponential to logarithmic. 
SUSTAIN: Sustain level is controlled manually and by an external signal 
RELEASE: Decay time time is controlled manually and by an external signal. 

Performances ATTACK time - 0.05 msec to 10 seconds ATTACK mode - logarithmic/exponential (EXP), switched A-HOLD - 0.5 msec to 2 seconds A-D LOOP ON; continious LFO, Attack/Decay or activated by an external signal DECAY time - 0.5 msec to 20 seconds DECAY SLOPE - exponential to logarithmic, manual SUSTAIN level - 0 to 5 Volts RELEASE time - 0.5 msec to 20 seconds 

Características

· 3U,14HP