Envíos
Gratis

En pedidos > A 199€

Bienvenido a Rage Audio!

94 473 3196

Navegación de la categoría

Sintetizadores modulares

Artículos 1 a 30 de 354 totales

por página
Página:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Cuadricula  Lista 

Configurar sentido descendente
  1. Doepfer A-100BS2 G6 PSU3

    Doepfer A-100BS2 G6 PSU3

    Entrega en 5-7 días

    2.099 € 21% IVA inc

    Sintetizador modular con Midi con PSU3 Power Supply, compuesto por los módulos:

    2x Standard VCO A-110
    2x ADSR A-140
    1 x LFO A-145
    1x LFO A-146 
    1x Ring Modulator A-114
    1 x Audio Divider A-115
    1 x VC Waveform Processor A-116
    1 x Noise/Random A-118
    1 x VCF1 A-120 (24dB low pass 1)
    1 x XP VCF A-106-6
    1 x linear VCA A-130
    1 x logarithmic VCA A-131
    1 x linear Mixer A-138a
    1 x logarithmic Mixer A-138b
    1 x Dual S&H A-148
    1 x Dual VC Switch A-150
    1 x Trigger Divider A-160
    1 x Trigger Sequencer A-161
    1 x Dual Slew Limiter A-170
    1 x Multiple I A-180
    1x  MIDI interface A-190-4
    30 patch cables (mixed)

     

    Saber más
  2. Doepfer A-100BS2 P6 PSU3

    Doepfer A-100BS2 P6 PSU3

    Entrega en 5-7 días

    2.099 € 21% IVA inc

    Sintetizador modular formato maleta portatil con PSU3 Power Supply
    compuesto por los módulos:


    2x Standard VCO A-110
    2x ADSR A-140
    1 x LFO A-145
    1x LFO A-146 
    1x Ring Modulator A-114
    1 x Audio Divider A-115
    1 x VC Waveform Processor A-116
    1 x Noise/Random A-118
    1 x VCF1 A-120 (24dB low pass 1)
    1 x XP VCF A-106-6
    1 x linear VCA A-130
    1 x logarithmic VCA A-131
    1 x linear Mixer A-138a
    1 x logarithmic Mixer A-138b
    1 x Dual S&H A-148
    1 x Dual VC Switch A-150
    1 x Trigger Divider A-160
    1 x Trigger Sequencer A-161
    1 x Dual Slew Limiter A-170
    1 x Multiple I A-180
    1x  MIDI interface A-190-4
    30 patch cables (mixed)

     

    Saber más
  3. Doepfer A-100BS2 P9 PSU3

    Doepfer A-100BS2 P9 PSU3

    Entrega en 5-7 días

    2.190 € 21% IVA inc

    Sintetizador modular formato maleta portatil A-100P9 PSU3 de 9U  compuesto por los módulos:

    2x Standard VCO A-110
    2x ADSR A-140
    1 x LFO A-145
    1x LFO A-146 
    1x Ring Modulator A-114
    1 x Audio Divider A-115
    1 x VC Waveform Processor A-116
    1 x Noise/Random A-118
    1 x VCF1 A-120 (24dB low pass 1)
    1 x XP VCF A-106-6
    1 x linear VCA A-130
    1 x logarithmic VCA A-131
    1 x linear Mixer A-138a
    1 x logarithmic Mixer A-138b
    1 x Dual S&H A-148
    1 x Dual VC Switch A-150
    1 x Trigger Divider A-160
    1 x Trigger Sequencer A-161
    1 x Dual Slew Limiter A-170
    1 x Multiple I A-180
    1x  MIDI interface A-190-4
    30 patch cables (mixed)

    Saber más
  4. Doepfer A-100G6 PSU3

    Doepfer A-100G6 PSU3

    Entrega en 5-7 días

    469 € 21% IVA inc

    Rack 6U PSU3 (2 x 3U) para módulos formato Eurorack

    Saber más
  5. Doepfer A-100LC6 Case PSU3

    Doepfer A-100LC6 Case PSU3

    Entrega en 5-7 días

    289 € 21% IVA inc

    Rack modular de bajo coste 6U (2 x 3U) para módulos formato Eurorack

     

    Saber más
  6. Doepfer A-100LC3 Case

    Doepfer A-100LC3 Case

    Consultar plazo de entrega

    189 € 21% IVA inc

    Rack modular de bajo coste 3U (1 x 3U) para módulos formato Eurorack

     

    Saber más
  7. Doepfer A-100PMS12 Case PSU3

    Doepfer A-100PMS12 Case PSU3

    Entrega en 5-7 días

    1.399 € 21% IVA inc

    Maleta de transporte 12U (4 x 3U) con PSU3 Power Supply para módulos formato Eurorack de 168HP de anchura

     

    Saber más
  8. Doepfer A-100PMS6 Case

    Doepfer A-100PMS6 Case

    Entrega en 5-7 días

    725 € 21% IVA inc

    Maleta de transporte 6U (2 x 3U) para módulos formato Eurorack de 168HP de anchura

     

    Saber más
  9. Doepfer A-100MC Mini Case

    Doepfer A-100MC Mini Case

    Entrega en 5-7 días

    110 € 21% IVA inc

    Mini case 3U de madera de 32HP de anchura útil, para módulos formato Eurorack

     

    Saber más
  10. Doepfer A-101-1 Vactrol Steiner Filter

    Doepfer A-101-1 Vactrol Steiner Filter

    Entrega en 5-7 días

    135 € 21% IVA inc

    Doepfer A-101-1 Vactrol Steiner Filter

    Este es el primer módulo basado vactrol en el sistema A-100. Un vactrol es una combinación de una luz en función de una resistencia (LDR) y un LED (diodo emisor de luz) ambos puesto en una pequeña caja resistente a la luz. El Aumento del brillo del LED provoca una disminución de la resistencia LDR (por ejemplo, la luz controlada módulo de tensión A-179 es una aplicación de un LDR). Este efecto se puede utilizar en circuitos que requieren resistencias variables para obtener la función deseada (por ejemplo VCFS VCAs, sincronizadores Phasers, delays Trigger VC, VC limitadores de giro, generadores de envolvente, LFO VC VC, VCO y muchos más)

    Saber más
  11. Doepfer A-101-2 Vactrol Lowpass Gate

    Doepfer A-101-2 Vactrol Lowpass Gate

    Entrega en 5-7 días

    98 € 21% IVA inc

    Filtro Vactrol Low Pass gate

    A-101-2 is a vactrol based combination of Low Pass filter (LP) and VCA and was inspired by the Buchla module 292. 

    The term "Low Pass Gate" was created by Don Buchla and stands for a module that can be switched between low pass and VCA. The control (manually and via external CV) is responsible for frequency in the low pass mode and for loudness in the VCA mode. 

    Additionally a combined mode LP+VCA is available. In this mode the sound becomes more dull as the loudness decreases. 

    In contrast to the Buchla design the A-101-2 offers attenuators for both CV and audio input, a manual resonance control and two gate inputs to control the function of the module in addition to the manual toggle switch.

    In principle the A-101-2 is a 12 dB low pass filter that can be switched to VCA or a combination of Low Pass and VCA. 

    The controlling elements for frequency (LP mode) resp. amplitude (VCA mode) are so-called vactrols. 
    Vactrols are known for their smooth sound behaviour. 
    Because of the vactrol circuit the audio signal is not fully attenuated in the VCA mode at the minimum setting of the F/A control. 

    The Frequency (in the LP mode) resp. the Amplitude (in the VCA mode) is controlled manually (F/A) and by the 2 control inputs CV1 (without attenuator) and CV2 (with attenuator). 

    The audio input is equipped with an attenuator to enable distortion too (above ~ position 5 distortion is obtained with standard A-100 audio levels, e.g. VCO). 

    The resonance function "colors" to the sound and is adjustable all the way up to self-oscillation. Resonance and consequently self-oscillation may vary with the filter frequency because of vactrol tolerances. Due to the circuit the resonance has a little bit an influence on the audio level (increasing resonance = increasing audio level). To obtain the original Buchla sound the resonance control simply has to be set fully counterclockwise. 

    The function of the module is controlled by a manual switch. The left and right positions of the switch correspond to LP resp. VCA mode. In the middle position one obtains the combination of Low Pass and VCA. In this position it is also possible to control the function of the module by the two Gate inputs G1 and G2. The table printed at the front panel shows the connection between the gate levels (L = low, H = high) and the module function. más) 

    Saber más
  12. Doepfer A-102 Diode Low Pass Filter

    Doepfer A-102 Diode Low Pass Filter

    Entrega en 5-7 días

    83 € 21% IVA inc

    Doepfer A-102 Diode Low Pass Filter

    Module A-102 is a reproduction of the legendary low pass filter design that uses diodes in the filter stage as frequency controlling elements resulting in "strange" resonance behaviour and frequency response as resonance and frequency are not independent from another. 

    - manual control of filter frequency 
    - 3 CV inputs (CV1, CV2, CV3), 2 of them with attenuator (CV2, CV3) 
    - input level control 
    - resonance control up to self oscillation (depends upon the frequency setting for the A-102) 

    Saber más
  13. Doepfer A-103 18dB Low Pass Filter

    Doepfer A-103 18dB Low Pass Filter

    Entrega en 5-7 días

    83 € 21% IVA inc

    Doepfer A-103 18dB Low Pass Filter

    Module A-103 is a voltage controlled low pass filter with 18dB/octave slope. The circuit is based on a modified transistor ladder (Moog ladder) and is a reproduction of the legendary TB303 filter. 

    - manual control of filter frequency 
    - 3 CV inputs (CV1, CV2, CV3), 2 of them with attenuator (CV2, CV3) 
    - input level control 
    - resonance control up to self oscillation

    Saber más
  14. Doepfer A-104 Quad Resonance Filter

    Doepfer A-104 Quad Resonance Filter

    Entrega en 5-7 días

    137 € 21% IVA inc

    Doepfer A-104 Quad Resonance Filter

    A-104 is a fourfold formant filter as used in the Mixtur Trautonium by Oskar Sala. It is made of four parallel resonance filters, each filter can be switched to low pass or band pass or off. 

    Frequency, resonance and level are controlled for each filter separately (no voltage control). The frequency range for the filters is about 50Hz...5kHz. The filter audio inputs are very sensitive so that distortion may intentionally be used to create new sounds - if desired. The A-104 is a versatile module for sound modification. In the first place it is used for reproduction of resonances (e.g. the vocal-like effects known from the Trautonium). In combination with the subharmonic generator A-113, the Trautonium Manual A-198 and some other A-100 modules one obtains a Trautonium replica. 

    Saber más
  15. Doepfer A-106 X-Treme Filter

    Doepfer A-106 X-Treme Filter

    Entrega en 5-7 días

    118 € 21% IVA inc

    Doepfer A-106-1 X-Treme Filter

    More than a MS-20 filter clone! X-tremly flexible 12dB lowpass and 6dB highpass with separate ins for the filters and endless combinations of how to mix the filters and their polarities. An extreme, exceptional and experimental module with very strange behavior!

    Saber más
  16. Doepfer A-106-5 12dB SEM Filter

    Doepfer A-106-5 12dB SEM Filter

    Entrega en 5-7 días

    78 € 21% IVA inc

    Doepfer A-106-5 12dB SEM Filter

    Module A-106-5 is a 12dB multimode filter that is based on the filter circuit of the Oberheim SEM module.The filter is equipped with a band pass output and a combined low/notch/high pass output. 

    For this output a control knob defines the relation between low and high pass signal. If both signals appear at the same level (i.e. middle position of the Mix knob) one obtains a notch filter. Otherwise the low or high pass signal predominates. The module does not feature self oscillation in contrast to most of the other filters of the A-100 system. The module generates a distorted audio signal if the level control is set to about 50% (i.e. center position) or more with A-100 standard signals like VCOs. 

    - Inputs: Audio In, CV1 In without attenuator, CV2 In with Polarizer 
    - Outputs: Bandpass Out, Low/Highpass Mix-Out 
    - Controls: Audio Attenuator, CV2 Polarizer, Frequency, Resonance, LP/HP Mix 

    Saber más
  17. Doepfer A-106-6 XP Filter

    Doepfer A-106-6 XP Filter

    Entrega en 5-7 días

    152 € 21% IVA inc

    Doepfer A-106-6 XP Filter

    Module A-106-6 is a multimode filter that is based on the filter circuit of the Oberheim Xpander. The module features 15 different filter types with 8 filters available simultaneously. 

    The toggle switch Filter Group is used to switch between 2 filter groups. 

    These filter types are available: 
    - 1L (6 dB low pass) 
    - 2L (12 dB low pass) 
    - 3L (18 dB low pass) 
    - 4L (24 dB low pass) 
    - 1H (6 dB high pass) 
    - 2H (12 dB high pass) 
    - 3H (18 dB high pass) 
    - 2B (6 dB band pass) 
    - 4B (12 dB bandpass)
    - 2N (notch) 
    - 3A (allpass) 
    - 2H1L (asymmetrical band pass made of a 12 dB high pass and a 6 dB low pass) 
    - 3H1L (asymmetrical band pass made of a 18 dB high pass and a 6 dB low pass) 
    - 2N1L (combination of notch and 6 dB low pass) 
    - 3A1L (combination of allpass and 6 dB low pass) 

    The module features voltage controlled resonance. For filter group 2 (2L, 4L, 2B ...) even self oscillation is possible. 

    All standard VCF controls are available: 
    Manual filter frequency control Frq, one control voltage input with attenuator (FCV2)and one without attenuator (FCV1, ~ 1 V/octave). In addition voltage controlled resonance with manual control (Q) and a CV input with attenuator (QCV) are available. 

    The circuit is based on a 24dB lowpass filter. The outputs of the four internal filter stages (i.e. the 6, 12, 18 and 24dB outputs) are mixed together with different levels and polarities to obtain 15 different filters. Because of this special circuit the outputs have slightly different levels and noise floor. This is caused by the different internal amplifications and numbers of stages that are required to generate the filter in question. If e.g. a filter is derived by one stage only (e.g. the 6 dB, 12dB, 18dB and 24dB low pass) the noise floor is smaller compared to a filter that is derived by a combination of all four filter stages. The module generates a distorted audio signal if the level control is set to about 50% (i.e. center position) or more with A-100 standard signals like VCOs. 

    - Inputs: Audio In, CV1 In without attenuator, CV2 In with Polarizer
    - Outputs: Bandpass Out, Low/Highpass Mix-Out 
    - Controls: Audio Attenuator, CV2 Polarizer, Frequency, Resonance, LP/HP Mix 

    Saber más
  18. Doepfer A-107 Multitype Morphing Filter

    Doepfer A-107 Multitype Morphing Filter

    Entrega en 5-7 días

    291 € 21% IVA inc

    Doepfer A-107 Filter

    Module A-107 is a completely new voltage controlled filter that has available 36 filter types: different versions of low pass, high pass, band pass, notch, all pass and filters with new response curves that have no name up to now. 

    The filters are organized in two groups of 18 filters each. 
    The transition between different filter types within one group can be soft (morphing) or hard (switching). 

    The filter was inspired by the ERWIK Musikelektronik Multimode Filter, which is based on the filter used in the Oberheim Matrix 12 resp. Xpander. 

    The possibilities of the A-107 go far beyond these filter designs as a lot of new filter types are available and the transition between filters can be soft (morphing) or hard (switching) and the filters can be arranged in 64 different voltage controlled filter chains. 

    The transistion between the different filter types is controlled by two parameters: 
    - Filter Step (marked Step at the front panel) 
    - Morphing Time (marked Morph at the front panel) 

    For both parameters manual control, one CV input with attenuator and one CV input without attenuator are available. 
    The 36 filter types can be arranged in filter chains (resp. filter sequencer or filter orders) so that this sequence of filters is passed through while the control voltage changes from 0...+5V. 

    Each chain consists of 32 steps. 64 filter chains can be programmed by the user and stored in the non-volatile memory of the module. 
    The following controls are used to program the filter chains: 

    - Step: button to address the desired step (1...32) within the filter chain in combination with the value encoder 
    - Filter: button to select the filter number (1...36) that is assigned to the current step within the chain in combination with the value encoder 
    - Chain: button to select one of the filter chains (1...64) in combination with the value encoder 
    - Program: button to store the current filter chain in one of the non-volatile memories (1...64) in combination with the value encoder 
    - Value: endless rotary encoder to change the parameter selected with the buttons 
    - 3 digit Display (the first digit indicates of the current value shows Step "S", Filter "F" or Chain "C", the second and third digit display the number)

    Additionally a "clocked" mode is available. This means that the steps of the currently selected filter chain are selected one after another. Each positive transition of the Clock signal calls up the next filter of the chain (jack socket marked Step Clock). 

    A positive trigger at the Step Reset input (jack socket marked Step Reset) resets to the first filter of the current filter chain. This allows e.g. to switch between the filters of the currently selected filter chain in sync with a sequencer. 

    Of course the standard VCF controls are available: 
    manual filter frequency control, one CV input with attenuator and one CV input without attenuator. In addition voltage controlled resonance with manual control, CV input with attenuator and CV control without attenuator are available.

    For the filters of the first group (1...18) self-oscillation is possible, the filters of the second group (19...36) do not feature self-oscillation. 
    On top of it a final VCA is available (even with manual control, CV input with attenuator and CV input without attenuator). 

    The filter design is 100% analog (CEM filter chip). Only the morphing control and memory managing is carried out by a microcontroller. 

    Remark: 
    Because of technical reasons the transition between the two filter groups (1...18, resp. 19...36) cannot be carried out soft as capacitors have to be switched. Soft transition (i.e. morphing) is possible only within the filter group (i..e. within the filters 1...18 or 19...36). Switching between filters causes a "click" if the filters are from different groups.

    Saber más
  19. Doepfer A-108 6/12/24/48dB Low Pass Filter

    Doepfer A-108 6/12/24/48dB Low Pass Filter

    Entrega en 5-7 días

    155 € 21% IVA inc

    Doepfer A-108 Low Pass Filter

    Module A-108 is a completely new voltage-controlled low pass pass filter based on the well-known transistor ladder (Moog ladder). The module has internally an 8 stage low pass filter with different slopes available: 6, 12, 18, 24, 30, 36, 42 and 48 dB per octave. 

    In addition it features an band pass output (i.e. band pass with transistor ladder). 

    In the factory the 4 low pass outputs of the A-108 are internally connected to the filter stages 6, 12, 24 and 48dB. From our first A-108 audio tests this seems to be the best output combination as these outputs generate audible different sounds. E.g. the audible difference between the 48dB and 42dB or between 42dB and 36dB is very little. But if desired any of the filter stages can be connected to one of the outputs. 

    Remark: 
    Only 4 output stages are available as this seems to be sufficient from our experiences. In the factory the out stages are connected to the filter stages with 6, 12, 24 and 48 dB slope. By changing the internal connections (jumpers or wires) each of the filter stages can be used but only four at a time. Even a multi-way switch could be used but from our results the factory setting (6/12/24/48dB) is the best combination for musical applications. From our experience it would e.g. make not much sense to have 30dB, 36dB, 42dB and 48dB available simultaneously - but if desired one could have this combination avaiable. 

    Resonance (Emphasis or Q ) can be adjusted manually right up to self-oscillation, in which case the filter will behave like a sine wave oscillator. 

    The A-108 features an external feedback input that enables the insertion of additinal modules into the feedback path (e.g. VCA for voltage controlled resonance or phaser/frequency shifter for phase/frequency shifting effects). The socket is normalized and internally connected to the 48dB low pass output if no cable is inserted into the feedback socket. 

    The frequency can be adjusted manually, or by voltage control. Three CV inputs (CV1, CV2, CV3) are available. CV2 and CV3 are eqipped with attenuators. 

    The filter audio input is very sensitive so that distortion - if desired - is possible even with normal A-100 levels (e.g. VCO output). Self oscillation will break off at high distortion levels as the internal feedback signal is drown out by the distorted audio signal. This feature may intentionally be used to create new sounds. 

    In combination with the Voltage Controlled Mixer A-135 and the Morphing Controller A-144 a filter with voltage controlled slope can be realized (i.e. controlling the slope from 6dB to 48dB via CV).

    Saber más
  20. Doepfer A-110 Standard VCO

    Doepfer A-110 Standard VCO

    Entrega en 5-7 días

    155 € 21% IVA inc

    Doepfer A-110 Standard VCO

    Module A-110 is a voltage-controlled oscillator. This VCO's frequency range is about eight octaves (ca. 15Hz ... 8kHz). It can produce four waveforms simultaneously: square, sawtooth, triangle, and sine wave. 

    The frequency or pitch of the VCO is determined by the position of the octave (Range) switch and tuning (Tune) knob, and by the voltage present at the CV inputs. Frequency modulation (FM) of the VCO is therefore a possibility. Footage (the octave of the fundamental) is set by the Range control in five steps, and Fine tuning controlled by the Tune knob by about +/-1 one semitone (can be modified for a wider range). You can control the pulse width of the square wave either by hand, or by voltage control - Pulse Width Modulation or PWM. 

    Technical remarks: 
    The core of the A-110 is a sawtooth oscillator (in contrast to the A-111-1, which is based on a triangle oscillator). The other waveforms are derived from the sawtooth by internal waveform converters. As the sawtooth reset (i.e. the back-to-zero slope) is not infinite fast but takes a little bit of time the derived waveforms triangle and sine are not perfect ! At the top of the waveform they have a small glitch or notch that is caused by the sawtooth reset and cannot be eliminated by the waveform converters. The sine is derived from the triangle by a simple diode-based converter and the sine shape is not perfect (only a rounded triangle).

    Saber más
  21. Doepfer A-112 Sampler / Wavetable Module

    Doepfer A-112 Sampler / Wavetable Module

    Entrega en 5-7 días

    159 € 21% IVA inc

    Doepfer A-112 Sampler / Wavetable Module

    Module A-112 is the combination of a voltage controlled 8 Bit Sampler and a wavetable oscillator. On top of it the module is able to generate some special effects. 
    A-112 was designed as an additional sound source with the typical sounds of the early 8 bit samplers and is not comparable with the modern polyphonic MIDI samplers available on the market. 

    Sampling mode: 
    - 8 bit audio resolution, 
    - 128kB memory in 2 banks 64kB each (equivalent to 2 seconds of sampling time for each bank with 32 kHz sampling rate), 
    - audio input with attenuator, 
    - overload display in record mode (gate LED), 
    - possibility of MIDI Dump to store sounds in a computer via MIDI, 
    - non volatile memory for the 2 samples in the module, 
    - manual tune control for adjustment of sampling rate for record and play,
    - CV input (~ 1V/Oct), 
    - both manual tune and CV determine the sampling rate respectively the pitch (pitch range is 5 octaves), 
    - gate input (not a trigger: the sample starts at the positive edge of the gate signal and is played as long as gate is high or until the end of the sample is reached), 
    - manual Gate button, 
    - non filtered audio output (thus quantizing noise can be used as an element of the sound intentionally) 

    Wavetable mode: 
    - special appearance of the sampling mode when playing a sample, 
    - the audio input is now used as a second control voltage input for moving through the sample in 256 byte wide loops (wavetables). 
    - To achieve the typical wavetable oscillator sounds the sampling memory must contain corresponding wavetable data (normally loaded via MIDI dump). These data contain a set of wavetables with different harmonic content (e.g. a filter sweep) to get the typical wavetable sound while moving through the tables via CV2. But you may also use a "normal" sample and go through the sample with CV2 to obtain partially amazing sounds never heard before. 
    - You may use for example sampled speech and go with CV2 through the syllables or speech shreds to get really very extreme sounds. 
    - An ideal addition for this feature is the Offset/Attentuator module A-183-2 which can be used to adjust the position of the wavetable (Offset) and the modulation depth (Att.). 
    - As modulation source an LFO (A-145, A-146, A-147, A-143-3), ADSR (A-140, A-141, A-142, A-143-1/2) or a random voltage (A-118, A-149-1) may be used. Even a ribbon controller (A-198 or R2M), the Theremin module A-178, the Joystick A-174 or the Wheels module A-174-2 are useful to drive through the wavetables.

     

    Saber más
  22. Doepfer A-113 Subharmonic Generator

    Doepfer A-113 Subharmonic Generator

    Entrega en 5-7 días

    233 € 21% IVA inc

    Doepfer A-113 Subharmonic Generator 

    Module A-113 is a new sound source that derives from an incoming pulse signal four so-called subharmonics (German: Subharmonische). 
    The term subharmonics was introduced by Oskar Sala in connection with his so-called Mixtur-Trautonium. 

    A subharmonic means in this context a sawtooth wave (German: Kippschwinger) whose frequency is derived from a master frequency and the master frequency is an integer multiple in the range of 1...24 of the subharmonic - in other words: the master frequency is divided by an integer 1...24 to obtain the subharmonic.

    Pay attention that the output waveform of a subharmonic is sawtooth (as also used in the original Trautonium) and not sine. 
    The term subharmonics is somewhat misleading. 

    The master frequency comes e.g. from an A-110 or A-111 to the frequency input of the A-113. The frequency dividers of the 4 subharmonics is adjusted with up/down buttons as displayed with 2 character LED displays. The subharmonics are available as single outputs and as mix output with adjustable levels for the subharmonics. 

    Two gate type control inputs enable to select between 4 different mixtures, i.e. 4 different settings of the frequency dividers. 

    In the original Trautonium these are controlled by foot switches to switch between 3 mixtures while playing (the original Trautonium has only 3 mixtures available but with the 2 gate inputs of the A-113 four different settings can be adressed). 

    Additionally the A-113 features a mixture memory with 50 presets. Each preset consists of 4 mixtures that can be selected with the gate inputs, each mixture contains the values of the 4 frequency dividers. 

    Inputs : master frequency (rectangle/pulse input), foot contr. 1 + 2 (gate 1+2) 
    Outputs: 4 single outputs, 1 mixture output 

    Saber más
  23. Doepfer A-114 Dual Ringmodulator

    Doepfer A-114 Dual Ringmodulator

    Entrega en 5-7 días

    77 € 21% IVA inc

    Doepfer A-114 Dual Ringmodulator

    Module A-114 contains two separate ring modulators. 
    A ring modulator outputs the product (Multiplication X • Y) of the signals at inputs X and Y. 

    It's similar to a VCA, but whereas a VCA only responds to positive voltages at the inputs (2-quadrant multiplication), the ring modulator responds to both positive and negative voltages (4-quadrant multiplication). 

    The ring modulator thus provides a refinement of amplitude modulation (AM). 

    Ordinary amplitude modulation will output the original carrier frequency fC as well as the two side bands (fC - fM, fC + fM) for each of the spectral components of the carrier and modulation signals - but ring modulation cancels out the carrier frequencies, and just lets the side-bands pass to the output. 

    A ring modulator is used for the production of bell-like sounds, alien voices, or just to produce new timbres.

    Saber más
  24. Doepfer A-115 Audio Divider

    Doepfer A-115 Audio Divider

    Entrega en 5-7 días

    65 € 21% IVA inc

    Doepfer A-115 Audio Divider

    Module A-115 is a four-way frequency divider 

    The frequency of a signal at the input is halved (half frequency = first sub-octave), quartered (1/4 frequency = second sub-octave), and so on. 
    In this way, the DIVIDER produces four sub-octaves (F/2 down to F/16). 

    At the output, the A-115 produces a summed mix of the original and the four sub-octaves. There are attenuators to control the amount (ie. Amplitude) of the original signal and each of the sub-octaves. 

    Bear in mind that the sub-octaves output by the A-115 are all true square waves. At the output there are always four square waves and the original signal available.

    Saber más
  25. Doepfer A-116 Voltage Controlled Waveform Processor

    Doepfer A-116 Voltage Controlled Waveform Processor

    Entrega en 5-7 días

    69 € 21% IVA inc

    Doepfer A-116 Voltage Controlled Waveform Processor

    Module A-116 provides voltage-controlled dynamic waveform modification of audio signals. It can produce new waveforms from the standard VCO shapes, and modulate these changes in real time. 

    The signal first of all goes through an input amplifier, which can attenuate the signal as well as amplify it by up to a factor of 2. 
    After the input amplifier, the signal goes through two parallel processors: a clipping circuit, and an asymmetrical amplifier. 

    The processed signals are added together and sent to the output. 
    Clipping-Level and Symmetry amounts are not just manually controllable, but can also be modulated by control voltages, to produce complex, constantly changing waveforms.

    Saber más
  26. Doepfer A-117 Digital Noise / Rnd Clock / 808 Sound Source

    Doepfer A-117 Digital Noise / Rnd Clock / 808 Sound Source

    Entrega en 5-7 días

    75 € 21% IVA inc

    Doepfer A-117 Digital Noise / Rnd Clock / 808 Sound Source

    Module A-117 is a combination module, including a digital noise generator and an 808 source. The digital noise generator uses random sequences of square waves (18 step shift register with multiple feedback), whose rate can go from random clicks to pure noise. 

    The colour of the noise is very different from the analog noise produced by the A-118. In addition to a manual setting, the rate can be controlled by an external clock - eg. VCO, LFO or MIDI clock. 

    The 808 Source aims to re-create the sort of multi-oscillator array that was used in Roland's TR-808 and 606 drum machines as the basis of the sound of the hi-hat, cymbals and cowbell. 
    The cowbell mix uses two oscillators, and the cymbals mix six.

    Saber más
  27. Doepfer A-118 Noise / Random

    Doepfer A-118 Noise / Random

    Entrega en 5-7 días

    66 € 21% IVA inc

    Doepfer A-118 Noise / Random

    Module A-118 is (as you might have guessed) a noise and random voltage generator. It produces three types of signal: white noise, colored noise, and random voltage.

    White and colored noise can be used as audio sources, and also, in conjunction with a sample and hold module, as control voltages, and the random voltage is a useful source of voltage control, especially for its low frequency content. 

    The A-118 gives you the ability to mix the relative amounts of Red (low frequency component) and Blue noise (high frequency component) in the colored noise output.There are knobs to control the rate of change and amplitude of the random voltage, and two LEDs indicate the state of the voltage at any one time.

    Saber más
  28. Doepfer A-119 External Input / Envelope Follower

    Doepfer A-119 External Input / Envelope Follower

    Entrega en 5-7 días

    66 € 21% IVA inc

    Doepfer A-119 External Input / Envelope Follower

    The pre-amp has two inputs: an unbalanced input for line level signals, with a gain factor of from 0 to 20, and a balanced input with a gain factor of from 0 to 500, for insertion of low level signals, for instance from a microphone or electric guitar. 

    The Envelope Follower reads the signal level of the input, and puts out a proportional voltage as an envelope at its own output. 
    The comparator generates a gate signal whenever the input goes above an adjustable trigger threshold. 

    Three LEDs help you keep track of overload, the envelope, and the gate signal.

    Saber más
  29. Doepfer A-124 Wasp Filter

    Doepfer A-124 Wasp Filter

    Entrega en 5-7 días

    81 € 21% IVA inc

    Doepfer A-119 External Input / Envelope Follower

    This design "abuses" digital inverters as analog operational amplifiers leading to distortions and other "dirty" effects that generate the specific sound of this filter. 

    The filter is equipped with a band pass output and a combined low/notch/high pass output. For this output a control knob defines the relation between low and high pass signal. If both signals appear at the same level (i.e. middle position of the Mix knob) one obtains a notch filter. Otherwise the low or high pass signal predominates. 

    The module does not feature self oscillation in contrast to most of the other filters of the A-100 system. 

    Inputs: Audio In, CV In (2x) 
    Outputs: Bandpass Out, Low/Highpass Mix-Out 
    Controls: Audio and CV attenuator, Frequency, Resonance, LP/HP Mix

    Saber más
  30. Doepfer A-125 Voltage Controlled Phase Shifter

    Doepfer A-125 Voltage Controlled Phase Shifter

    Entrega en 5-7 días

    81 € 21% IVA inc

    Doepfer A-125 Voltage Controlled Phase Shifter

    Module A-125 (VC Phaser) is a voltage controlled phase shifter. 
    Phase shifting can be controlled either manually or by voltage control. 

    Other parameters which can be controlled are resonance (governing the depth of the comb filtering, and tonal color) and mix (the amount of the original signal which is added to the phase-shifted signal). 

    The A-125 is used to generate the typical phaser sound ("jet sound"). Due to the voltage control feature not only the usual LFO-controlled phasings but even ADSR-, random-, sequencer- or S / H-controlled phasings are possible 

    Saber más

Artículos 1 a 30 de 354 totales

por página
Página:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Cuadricula  Lista 

Configurar sentido descendente