Navigation

  • Fave 0

Doepfer A-127 BOM

Doepfer A-127 BOM

Fabricante

Doepfer

StockEntrega en 5-7 días

72 €
O
100% Garantía oficial española del fabricante
Todos nuestro productos tienen garantia oficial en España
Empresa 100% española
Empresa localizada en España con local y tienda física

Comparte este producto

Módulo de conexión para A-127

The breakout module allows the separate use of each of the three A-127 filters. In addition the filters can be patched parallel or serial. Especially the serial...

Más información

Módulo de conexión para A-127

The breakout module allows the separate use of each of the three A-127 filters. In addition the filters can be patched parallel or serial. Especially the serial connection of three notches generates very complex phasing-like structures. For parallel filter connection the existing mixer of the main module may be used or an external mixer. For serial connection the filters are patched in the desired sequence at the breakout module. A jumper is used to define the filter type for each sub-unit for the mix unit of the main module. 

Remark: The breakout module can be used without modification only in combination with the new version of the A-127 (pcb printing "Version 4"). Only the new version has the expansion connector available, that is required to connect the breakout module. It's also possible to combine the breakout module with older versions of the A-127 (versions 1, 2 and 3) but in this case soldering is required to connect the breakout module to the main module (soldering 4 wires to each filter unit). We will publish corresponding modification instructions as soon as the breakout module will be available.

Características

· Para A-127
· Filtro 'notch' adicional para cada subunidad
· Salidas separadas para paso bajo, paso alto, paso banda y banda eliminada para cada subunidad
· Entrada de audio separada con atenuador para cada subunidad
· Anchura: 8 HP
· Profundidad: 55mm