Navigation

  • Fave 0

Doepfer A-138e Quad 3-Way Crossfader/Mixer/Polarizer

Doepfer A-138e | Rage Audio

  • Side Doepfer A-138e | Rage Audio

Fabricante

Doepfer

StockEntrega en 5-7 días

82 €
O
100% Garantía oficial española del fabricante
Todos nuestro productos tienen garantia oficial en España
Empresa 100% española
Empresa localizada en España con local y tienda física

Comparte este producto

Módulo Crossfader/Mezclador/Polarizador de 4 canales
Module A-138e contains four identical units that can be used for different crossfading, mixing and polarizing applications 

- Polarizer: only input A is used, inputs B and C...

Más información

Módulo Crossfader/Mezclador/Polarizador de 4 canales


Module A-138e contains four identical units that can be used for different crossfading, mixing and polarizing applications 

- Polarizer: only input A is used, inputs B and C are unconnected. In this case the sub-unit works as a polarizer. In the ccw position of the control the signal connected to input A appears at the output, in the cw position the inverted signal, in the center position no signal appears at the output 

- Two-way Crossfader type 1: Two different signals are connected to the inputs A and C, switch is in the left position (switching contact of input B is open). In this case the sub-unit works as two-way crossfader between the two signals connected to the inputs A and C. In the center position both signals appear with the same level. 

- Two-way attenuator: Two different signals are connected to the inputs A and C, switch is in the right position (switching contact of input B is connected to GND). In this case control is used to attenuate signal A (between ccw and center position) or signal C (between center and cw position). In the center position no signal appears at the output. Similar to the two-way crossfader but without signal in the center position. 

- Three-way Crossfader: Three different signals are connected to the inputs A, B and C. In this case the sub-unit works as three-way crossfader. In the ccw position only signal A appears at the output. Between ccw and center position a mix of the signals A and B appears at the output. In the center position only signal B appears at the output. Between center and cw position a mix of signals B and C appears at the output. In the cw position only signal C appears at the output. 

- Two-way Crossfader/Polarizer type 2: Two different signals are connected to the inputs A and B. In the ccw position only signal A appears at the output. Between ccw and center position a mix of the signals A and B appears at the output. In the center position only signal B appears at the output. Between center and cw position a mix of signals B and inverted signal A appears at the output. In the cw position only the inverted signal A appears at the output. Useful for CV mixing: e.g. signal A = ADSR, signal B = LFO. In this case one can fade between ADSR ... LFO + ADSR ... LFO ... LFO - ADSR ... - ADSR. 

In addition the inverted signal of input A is available as a separate output. Potentiometers with center detent and center terminal are used as controls.

Características

· Crossfader/Mezclador/Polarizador
· Puede utilizarse para atenuar, polarizar y hacer 'crossfade' sobre audio o señales de control
· Formato Eurorack
· Anchura: 16HP
· Profundidad: 30mm
· Consumo de corriente: +10mA