Navigation

  • Fave 0

Doepfer A-163 Voltage Controlled Frequency Divider

Doepfer A-163 | Rage Audio

  • Side Doepfer A-163 | Rage Audio

Fabricante

Doepfer

StockEntrega en 5-7 días

77 €
O
100% Garantía oficial española del fabricante
Todos nuestro productos tienen garantia oficial en España
Empresa 100% española
Empresa localizada en España con local y tienda física

Comparte este producto

Módulo divisor de frecuencia VC

Module A-163 is a voltage controlled audio frequency divider. The frequency of the input signal (preferably the rectangle output of a VCO) is divided by an integer factor...

Más información

Módulo divisor de frecuencia VC

Module A-163 is a voltage controlled audio frequency divider. The frequency of the input signal (preferably the rectangle output of a VCO) is divided by an integer factor N (N = 1, 2, 3, 4 ... up to 32). 

N can be adjusted manually and modulated with an external control voltage (e.g. from LFO, ADSR, Random, MIDI-to-CV, Theremin, Light-to-CV, analog sequencer) with attenuator. The control input has polarizing function, i.e. the manually adjusted dividing factor can be modulated upwards or downwards. 

The output waveform is rectangle with 50% duty cycle. 
Unlike the A-115 with fixed dividing factors (2, 4, 8, 16) the dividing factor of the A-163 is voltage controlled and can be any integer value between 1 and about 20 (but only one output). 

In contrast to A-113 the dividing factor of the A-163 is voltage controlled and the output waveform is rectangle (the A-113 has 4 sawtooth outputs with 4 adjustable but not voltage controlled dividers). 

Applications: 
dynamic voltage controlled frequency division of audio signals or modulation signals. 
Inputs: CV In, Audio In (rectangle)
Output: Audio Out (resp. rectangle modulation CV out after modification)
Controls: Manual N, CV attenuator 

The module is equipped with an additional jumper at the bottom side of the pc board. This jumper is used to select DC coupled (jumper installed) or AC coupled mode (jumper removed). If the module is used to divide slowly changing signals (like clock, trigger, gate or rectangle signals of an LFO) the DC coupled mode has to be selected. For audio signals the AC mode is recommended.

Características

· Divisor de frecuencia VC
· Divisor de frecuencia de audio
· Controlado por voltaje
· La frecuencia de la señal de entrada (audio) se divide por el factor entero
· Formato Eurorack
· Anchura: 8HP
· Profundidad: 45mm
· Consumo de corriente: +40mA