Navigation

  • Fave 0

Doepfer A-120 Low Pass 1

Doepfer A-120 Low Pass 1 | Rage Audio

  • Side Doepfer A-120 Low Pass 1 | Rage Audio

Fabricante

Doepfer

StockEntrega en 5-7 días

98 €
O
100% Garantía oficial española del fabricante
Todos nuestro productos tienen garantia oficial en España
Empresa 100% española
Empresa localizada en España con local y tienda física

Comparte este producto

Módulo de filtro pasa bajo controlado por voltaje
Module A-120 is a voltage controlled low-pass filter, which filters out the higher parts of the sound spectrum, and lets lower frequencies pass through. 
The...

Más información

Módulo de filtro pasa bajo controlado por voltaje


Module A-120 is a voltage controlled low-pass filter, which filters out the higher parts of the sound spectrum, and lets lower frequencies pass through. 
The Cut-Off Frequency determines the point at which filtering takes effect. 

You can control this manually, or by voltage control (filter modulation, for instance by an LFO). Three CV inputs are available, and the sum of the voltages from these affects the filter cut-off. 

VCF1 is a co-called "transistor ladder" design, with a cut-off slope of -24 dB/octave, as in various Moog synthesizers. 
That's what gives it its classic, legendary Moog sound. 
Resonance (or Emphasis) is adjustable all the way up to self-oscillation - in which case the filter behaves like a sine wave oscillator.

Características

· Filtro paso bajo 1 (VCF1) de 24db
· Anchura: 8HP / 40,3mm
· Profundidad: 65mm (medidos desde la parte posterior del panel frontal)
· Corriente: +30mA (+12V) / -20mA (-12V)

Connections: 
· CV1 input 
· CV2 input 
· CV3 input 
· Audio input 
· Audio output