Sintetizador analógico monofónico

Nuevas mejoras en la version 2 

· Modo trifónico (poliéster de 3 notas).
· Algunos interruptores basculantes se reemplazan con un conector jack para una mayor capacidad de parcheo.
· Los potenciómetros IG y Patternator se sustituyeron por tipos de precisión.
· Tono de sintonizador de 440 Hz.
· Entrada de reloj IG.
· Salidas de disparo Bar1 / Note0.
· Arpegiador reemplazado por mini secuenciador por pasos.
· Muchos ajustes internos de rendimiento.

· 3 VCOs each featuring Sawtooth and Square wave.
· All have CV inputs for Pitch and Pulse width.
· Manual Pulse width.
· VCO 1 also has an Octave switch and Cross modulation switch (FM).
· VCO 2 has a Wide range switch – to make the Tune range very wide (down to LF!). It also has oscillator Sync.
· VCO 3 also has a Wide range switch. Also, MIDI pitch control can be disabled to make this a free running oscillator. Ideal for modulation duties.· VCO 2 and 3 can both be used as LFOs.
· White Noise.
· Sub oscillator, taken from VCO 3.
· Mixer – with Mute switches and additional audio inputs.
· Multimode 12db filter – featuring Low pass, High pass, Band pass, and Notch filters.
· VCA – with EG and Thru (bypass) switch.
· LFO – with delay (fade in) feature.
· 2 Envelope Generators. With Triggering options.
· MIDI In, Out, Thru
· Interval Generator. A special type of pitch transposer. You can set 6 different pitches to each of the switches, and then transpose the VCOs manually to create performances. Great when used in conjunction with the arpeggiator and / or patternator.
· Arpeggiator – Using a MIDI keyboard program in notes to arpeggiate!
· The arpeggiator can also be used as a simple 16 note sequencer.
· The arpeggiator will transmit the notes to MIDI Out
Patternator – this is a unique type of sequencer / rhythm generator.
· Use the 4 CV control to create melodic loops – change the the loop using the Skip and Reset switches in real time!
· Use the 2 Beat knobs to alter the 8 step gate / trigger pattern generator.
· Unique artistic case design. 5 minutes with a screwdriver and the plan can be flipped, allowing the synth to be laid flat.
· Real analogue hard wood sides,  from a sustainable source.
· MIDI to CV output socket including clock.
· All circuits have extensive minijack input and output sockets. It can be cross-patched within its self to create an infinite range of sounds. Or it can be cross patched with other synths and modulars.