Navigation

  • Fave 0

Doepfer A-110-2 Basic VCO

Doepfer A-110-2 Basic VCO | Rage Audio

  • Side Doepfer A-110-2 Basic VCO | Rage Audio

Fabricante

Doepfer

StockEntrega en 5-7 días

118 €
O
100% Garantía oficial española del fabricante
Todos nuestro productos tienen garantia oficial en España
Empresa 100% española
Empresa localizada en España con local y tienda física

Comparte este producto

Módulo VCO básico Eurorack
Module A-110-2 is a low-cost voltage-controlled oscillator. It's a slightly reduced version of the standard VCO A-110-1. Compared to the A-110-1 the A-110-2 has no sine output and the (expensive) octave rotary...

Más información

Módulo VCO básico Eurorack


Module A-110-2 is a low-cost voltage-controlled oscillator. It's a slightly reduced version of the standard VCO A-110-1. Compared to the A-110-1 the A-110-2 has no sine output and the (expensive) octave rotary switch is replaced by a 3-position toggle switch. In return the A-110-2 is equipped with an additional linear FM input and a soft sync input. A jumper is used to select the range of the tune control between about 1/2 octave and about 4 octaves. The width of the module is only 8 HP compared to the 10 HP of the A-110-1.

All other features are essentialy the same as for the A-110-1.

Explanation of the jumpers and trimming potentiometers:
JP2: CV connection to A-100 bus
JP3: range of Tune control (installed = about 4 octaves, not installed = about 1/2 octave)
JP4: AC/DC coupling of the linear FM input (installed = DC coupling, not installed = AC coupling)
P5: 1V/Oct scale
P6: frequency offset
P7: high-end trim
P8: adjustment +1 Oct. range switch
P9: adjustment -1 Oct. range switch
P10: temperature VCO heater

Características

· Para sistema modular Eurorack
· Interruptor de palanca de 3 posiciones
· Entrada FM lineal y entrada soft sync
· Selecciona el rango del control de la afinación alrededor de 1/2 octava y alrededor de 4 octavas a través de jumper
· Anchura: 8HP 
· Profundidad: 50mm