Módulo de Acceso a Bus

Doepfer A-185-1 Bus Access
Active bus access module to feed CV and Gate into the A-100 bus (e.g. when using more than one frame or with external CV/Gate interfaces). 
Miniature jack sockets for CV In, Gate In, 2xCV Out, 2xGate Out, 2 LEDs for CV/Gate control

In general the A-185 is recommended as soon as more than 2 VCO's (A-110, A-111) are controlled by the same control voltage source.
Without interconnection of the A-185 in this case tuning inaccuracies (scale) may occur.

The A-185 is mounted close to the VCOs.
The controlling voltage for all VCOs is applied to the CV In socket of the A-185. By means of the CV line of the bus board the CV is connected to all VCOs at the same bus board.